Shop Detail
Airmar 175WR-4 Transducer Housing Wrench
  • Cost: $43.53
  • Quantity: 2
  • Free Shipping
  • Views:
  • Sold and Shipped By: Aztek Computers
175WR-4 Transducer Housing Wrench

A single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut.
Use wrench 164WR-2 or 164WR-3 for the hull nut.

For use with:
  • B164
  • B175
  • SS164
  • SS264


IMPORTANT: the design of the housing for these transducers changed slightly in June 2012. This wrench is for the newer design and has an internal width of 2-3/4". If you need a wrench for the older designs then use the 164WR-4 instead, with an internal width of 2-7/16".
175WR-4 Transducer Housing Wrench

A single-handed wrench that holds the main thru-hull housing via the wrench flats on the top of the housing to facilitate tightening of the hull nut.
Use wrench 164WR-2 or 164WR-3 for the hull nut.

For use with:
  • B164
  • B175
  • SS164
  • SS264


IMPORTANT: the design of the housing for these transducers changed slightly in June 2012. This wrench is for the newer design and has an internal width of 2-3/4. If you need a wrench for the older designs then use the 164WR-4 instead, with an internal width of 2-7/16.

© 2025 eSellerBot. All rights reserved.